Aquarium Illusions Inc 17211 - 107 ave NW
There are no products in your cart. Perhaps the item you chose is sold out.
Showing 1 - 24 of 25
The Apex New Generation aquarium controllers is easily one of the most advanced fish tank controllers available on the market today. With wifi connectivity, an easy-to-use cloud interface, and a wide range of controllability, this Apex controller is the p
One simple connection links the DDR to the DŌS. No worries about fooling around with loose wires, float switches, etc. Just plug it in and it will show up in your Apex Fusion Dashboard.
EcoTech VorTech pumps are one of the most widely used, and loved, pieces of aquarium gear on the market today.
With its innovative, low-profile magnetic mount, you get up 40 degree range of motion on the pivot and then the entire pump rotates 360 degrees. This provides so many more options than flow that coming straight out from the side or back of the aquarium. I
The PMUP is a 24VDC submersible pump that was designed to directly connect to the DC24 accessory ports on either the 1Link module OR the same ports on the new Energy Bar 832. If you own our WAV powerheads or our new Apex, then you have a place to plug it
With the Apex and the LSM – Lunar Simulator Module, you can load in the entire year’s lunar cycle data and your moonlight LED will dim and brighten according to the true lunar cycle. This has been shown to benefit spawning cycles in some tank organisms.
Use this probe in combination with the ALD module. The probe is low-profile so it slips easily under carpet; hiding it away, but giving you the peace of mind of leak detection. Easily plugs into the ALD with a modular RJ11 connection.
This attractive fluid containment system stores your dosing fluids in style and tells you when it’s time to refill!
Each side stores two liters (2L) of fluid
Connects directly to your DŌS
Optical sensors inform your APEX when levels are low
Features of the Automatic Feeding System – AFS:
Feeds pellet or flake food in varying amounts
Apex can be set so that the AFS will feed from one time to as many times as you like throughout the day
Connects via the Apex AquaBus
“Stay-dry” system has
Whether for your ATO reservoir, to use as a sump-high alert, or for your long term water storage such as a brute container, these optical sensors plugin into the FMM. In standalone use when used in your ATO reservoir (plugged into port-4), the FMM will st
pH / ORP Probe Module – PM1
With the ALD you can immediately solve one of the biggest issues around having an aquarium. Now, even when you are away from home, your Apex can alert you when: Your ATO sticks and you overflow the sump, your external overflow leaks, a seam starts leaking
Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second junctio
A multi-purpose dosing and fluid delivery system of uncompromising quality combined with the simplicity of Apex Fusion software wizards for operations such as:
2-part dosing (Calcium and Alkalinity)
Other additives dosing
Automatic water changes
2 Channel Cable to connect two separate LED color channels from your 0-10V dimmable LED light to the Apex System or the Advanced LED Dimming Module – VDM. This cable has a RJ45 plug on one end and bare wires on the other that must be connected in the mann
Alternate Gyre Mode Modified Cable for IceCap Gyre Interface Module
This Energy Bar 832 was redesigned from the ground up. Not only does it have eight 120V AC outlets, but it includes an internal 100W 24VDC power supply as well. That power supply feeds three built-in 1LINK ports as well as two 24VDC accessory ports. Each
With this module, you can outfit your Apex System with the ability to control many different brands of LED lights…from those that use the common 0-10V interface to the more complex like those that use a serial port connection such as the Aqua Illumination
When connected to the I/O Port of your Apex, Apex Lite, or PMx module, the Breakout Box gives you an easy way to connect up to six external switch inputs to your Apex. Examples of things you might connect in this manner include:
– Float Switches for su
Salinity / Conductivity Probe – Lab Grade
Start measuring salinity in your tank and get alerts when out of range
Buy this probe if you are:
– Replacing an old probe
– Adding salinity monitoring to your system via a PM
Lab quality probe w/10` cabl
This flow sensor connects to the FMM, monitors the flow of water through the device, and then reports it back to your Apex via the FMM. This sensor is most often used to measure the flow in the main return line of a standard-sized aquarium.
Long-life Temperature Probe
•Proprietary design and construction ensures longer life
•Purchase extra temperature probe when monitoring salinity with PM2 to obtain even better accuracy.
Apex Leak Detection Module